1610 TECHNICAL SPECIFICATIONS

General
Operating Voltage: 100-240 VAC
Frequency: 50-60 Hz
Current Rating: 4-2 A (Fuse 250V 6A SB)

Dimensions: 11.75” (298mm) x 8.65” (220mm) x 4.68” (119mm)
Mass: 7.22 lbs. (3.28 kg)

Software
Required: BPWin
File Type: including, but not limited to, binary, Intel, JEDEC, Motorola, POF, RAM, straight hex, Tekhex, Extended Tekhex, ASCII hex, Formatted Binary (.DIO), AFM, OMF, LOF
Device Commands: blank, check sum, compare, options, program, test, verify
Features: data editor, revision history, session logging, on-line help, device and algorithm information

Hardware
Calibration: annual; may be verified on site with optional socket module
Diagnostics: pin continuity test, ROM, CPU, pin drivers, power supply, communications, cable, calibration verification timing, ADC, DAC
PC System Requirements: Windows XP, Windows 7

PIN Drivers
Quantity: 240-pins standard
Analog Slew rate: 0.3 to 25V/µs
Vpp Range: 0-25V
Ipp Range: 0-70mA continuous, 250mA peak
Vcc Range: 0-12V
Icc Range: 0-1A
Very low voltage: to 1.5V (Vdd)
Rise Time: 4ns
Overshoot: none
Protection: overcurrent shutdown, power failure shutdown
Independence: pin drivers and waveform generators are fully independent and concurrent on each site

Standard Accessories Included
software on CD-ROM
user manual on CD-ROM
power cable
data cable
1-year hardware warranty

Features
File Loading: automatic file type identification; no download time because programmer is PC controlled; supports Intel, JEDEC, Motorola S-record, POF, straight hex, hex-space, Tekhex, and other file formats
Device Selection: intelligent device selector allows you to type as little or as much of the part number as you like then choose from a list of devices matching your description
Devices Supported: including, but not limited to, Antifuse, Low Voltage, PROM, EPROM, EEPROM, Flash EEPROM, Microcontrollers, SPLD, CPLD, FPGA
Continuity Test: each pin, including Vcc, ground, and signal pins, may be tested before every programming operation
Protection: overcurrent shutdown; power failure shutdown; ESD protection, reverse insertion, banana jack for ESD wrist straps
Options: available Socket Modules including, but not limited to, Universal PLCC, standard PLCC, PGA, CSP, BGA, µBGA, SOIC, QFP, TSOP, LCC, SDIP, PCMCIA, SIMM—JobMaster™ software, and Advanced Feature Software
Programming Yield: assured by independent universal pin drivers on each socket, short distance from pin drivers to device, and accuracy of waveforms
Algorithms: all algorithms are manufacturer approved or certified (if required)—BPM Microsystems has an excellent record of being first to provide certified algorithms for new devices
Algorithm Updates: software updates are available throughout the year